Changelog:

3.1.0.64:

* Added Intel Version: 15.17.19.64.2869 (8.15.10.2869).
* Performance increased a bit in some games: (I didn't tested the games, my private betatester friend did):

Quote:
- League of Legends: He said: Well before this new update I would get between 10-21 fps with low resolution
and everything on very high and like 0-9 in a teamfight and this was before the graphics update they made
and everything And when they made the graphics update I was getitng like 9-15 so it was hard to play..
like really hard.

But with this driver it made my fps boost up..Like I stay at 21-40 fps through
the entire match with 1360x768 resolution and very high everything(except shadows), And team fights
aren't as laggy but still are in a sense and everything runs smoothly and better.



Try other games by yourself (I didn't tested this games, my personal betatester and friend did -I don't even play League of Legends-).

3.0.0.64 - FINAL:

* Added Windows 8 Compatibility
* Fixed Sleep/Hibernate mode Bug (Not tested) - NOT FIXED CONFIRMED BY Slimpt

3.0.0.64 - BETA01:

* Added compatibility with:
· Intel(R) B43 Express Chipset
· Intel(R) G41 Express Chipset
· Intel(R) G43 Express Chipset
· Intel(R) G45 Express Chipset
· Intel(R) Q43 Express Chipset
· Intel(R) Q45 Express Chipset
· Mobile Intel(R) GL40 Express Chipset
· Mobile Intel(R) GM45 Express Chipset
· Mobile Intel(R) GS45 Express Chipset

*Fully support of my Tool to fix L4D2 and Portal 2
*The curious OpenGL bug.
*Removed GMA HD CUI and rolled back the old one because some people don't like it, but is Ok

2.13.13.64:

*Added Intel Driver Update (15.17.18.2555)
*Added Intel GMA HD CUI (Fixed Display Resolution List Bug, now CUI works at 100%).

2.13.12.64:

*Removed 2011 from Version, now in the end of versions say: X.XX.XX.86 (For x86 OS) and X.XX.XX.64 (For x64 OS).

2.13.11.2011:

* Added a Tool called: RoyalSetup™ (Now you can check for Updates).
* Added Intel Driver Update (15.17.17.64.2413).
* Increased Performance on some games.
* Added Avalon.reg and Addgame.reg (this time Addgame is only 1 Registry).

2.13.05.2011:

* Increased Performance on some games.
* Changes on Setup.

2.13.00.2011:

* Fixed some problems with Aero and some mistakes i made.
* No more "This computer does not meet the minimun requirements for installing the software."
* Now some games support High Resolutions on High settings (only textures) at 20+ FPS. (Example: Dragon Age: Origins).

2.00.00.2011:

* Some problems on CUI.

1.00.00.2011:

* 100% custom codes for this release.-
* Multi language.-
* Pipe optimization.-
* Better 3D rendering.-
* High definition audio.-
* DirectX 10 fully support.-
* Dynamic Memory Speed.-
* Increases Video RAM Memory.-
* Increases fixed segment.-
* Better deep colors.-
* Enable media scaling.-
* Enable dynamic scaling.-
* Best Power Plan settings.-
* Black screen problem on some games was solved.-
* Texture/Shadow problem on some games was solved.-
* More performance on 3D design tools.-
* More performance on newest games (5-10fps).-

Usage:

1. Install Microsoft .NET Framework 4
2. Uninstall the old driver first, disable Windows Update and Reboot.
3. Install the newer driver versión using "RoyalSetup.exe", activate Windows Update and Reboot.

Note:

* This Driver is only for Windows Vista/7 x64 (64 Bit).
* For more information read the: Royal BNA Driver [FAQ]

[/list]

Enjoy.

~Sniper[bna]™
Questions or comments are welcomed.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGE.

-----------------
--->SUPPORT US WITH SMALL DONATION<---
For the continuing great work!
-----------------

i installed these driver a lot of time

the first time i install this overwriting previous version (3.0.0.64) but nothing changed.. driver version still 3.0.0.64 and in the setup wizard it say: installing version 3.0.0.64.. also FPS was the same on all game.. why?

i tried also to uninstall previous version but i was getting a lot of problem on recognizing driver and video card so i did a system configuration recovery in order to restore previous state..

have you a solution? 3.0.0.64 was installed correctly but this version won't install.. i followed all instruction but nothing.. i have windows 8..

Your fault is overwrite the previous driver without uninstall it, I always say: Uninstall the old driver first. Because this problems will happen, people NEVER understand. I can't do nothing because I don't use Windows 8, the only way s back to intel's driver or keep the old.

i tried that! after deleting if i install this driver the system have 2 royal bna driver with no resources to use ! so i have no video card recognized the monitor stay at lower resolution, and so i don't have driver installed.. i will try another time and if i will get the same problem i will show to you some screenshot

i doesn't work, here the screenshot of what happened after unistall all previous video driver and install these.. i think the problem is in installation procedure that has problem with updating from previous royal bna driver version or when installing newest bna driver after unistalling old bna driver






why 3.0.0.64?

the only solution is to come back to old intel driver but i lose that from the system because when i unistall royal bna driver and it come back to intel driver, when i install new royal bna driver he recognize intel driver as two royal bna driver as first screenshot.. and finally if i install royal bna driver overwriting those two driver it doesn't work, it will stay with those two driver that doesn't work

i can't be more exaustive.. i hope you understand the problem and try to find a fix.. maybe when you add (* Added Intel Version: 15.17.19.64.2869 (8.15.10.2869)) it lose windows 8 compatibility.. i don't know what is the problem.. help me please..

Thanks for the new driver. I'm curious to how your beta tester was able to achieve those settings and resolutions in LoL getting those fps. I installed these and turned everything up to very high except shadows (which are off) @1280x800 and I only get 20-25 fps when noone is around and in teamfights it's unplayable. In order for me to get 40+fps I have to turn everything on low except for character detail which was set to medium. System specs are as follows:
Core 2 Duo T6400 (2.0ghz)
4gb PC2-6400 DDR2 Ram
Intel GMA4500MHD gpu

My resources are not used much at all (25% ram usage max at idle) and I keep my computer well maintained as far as defrags and whatnot. I also have fresh Artic Silver 5 Thermal compound on my cpu and gpu. I don't get how people are getting these claimed fps rates when I have the same chipset and I'm getting crap.

I really can't answer this because I don't play LoL, but my friend does and he play the game a lot and tried the game for the test, if you want you can add him to Xfire and talk about it: http://www.xfire.com/profile/segifreed/

But you said you installed the driver without uninstalled the old first, can cause problems like this, and the only way to fix them is reinstalling the OS (Well thats what a friend did, long time ago, installed the driver without uninstall the old one and I never had this problem).

Thats why I always say: Uninstall the old driver first, reboot, then install the driver, reboot and all done.

i said also that i've tried to unistall the old driver. is all written in my post.. if you see the third screenshoot you will see that it is installing 3.0.0.64..

i think that overwriting the same productor driver, so: new royal bna over old royal bna is the same thing to update old intel driver to new intel driver.. infact if i try to overwriting 3.0.0.64 with this new driver it goes fine but nothing change because in installation procedure it say 3.0.0.64 and not 3.1.0.64 also after unistalling old driver! you must check this!

if you read Kaotik7D post he said that nothing changed in fps, maybe because it's the same problem! the setup wizard install 3.0.0.64 and not 3.1.0.64!

i hope you understand now..thank's for your work